Masking the Left Wing

I had a long weekend break and was able to get home for a few days. Tabitha came over to help install the inspection hole covers on the right wing. I measured the right wing’s tip and root sections so that I could transfer marks onto the left wing tip and root. Then I connected those marks with the fine-line tape. I installed the flap and measured and marked the spots on the trailing edge where the stripes would end. Those steps positioned the edge of where the stripes would start and end. I masked the to-be-blue areas with paper and cheap tape, and then left it all there to paint later.

Posted on
Hours Logged This Session: 4.4
Total Hours: 1883.75

Leave a Reply